Department of Clothing & Textiles, Yonsei University
Corresponding Author:
Jongsuk Chun ,Tel: +82-2-2123-3107, Fax: +82-2-312-8554, Email: jschun@yonsei.ac.kr
Received: December 22, 2010; Revised: January 10, 2011 Accepted: March 2, 2011.
ABSTRACT
This study developed a method of calculating dynamic wearing ease (DWE) to make patterns for coverall work clothing. The DWE was measured from 3D body scan data of women in their 20's (n = 10). The body postures adopted for measuring the DWE were sitting and deep bending postures. Three types of experimental patterns (A, B, C) were developed. The DWE was applied at the waist and hip lines of the pattern. The location and size of the DWE varied from one pattern to another. For pattern B, DWE of 8.8cm was applied at the back of the waistline. For pattern C, 5.3cm was applied at the waist for the center back line, and 3.5cm was applied at the under hip level. The comfort of the experimental clothing was evaluated in six body postures. The results showed that patterns B and C were comfortable at the crotch, shoulders, and arm pits. Pattern C was comfortable at the hip and crotch areas in the arms lifting-up posture and the stepping-up posture. The appearance and fit of the experimental clothing were evaluated by the panels. Patterns B and C fitted better than pattern A at the abdomen. The results suggest that DWE should be applied at the waist and hip levels for making coverall work clothing patterns.